9
Connect AirProbe to the Back Housing
(two inlets located near the air flow outlet.
See air flow diagram on previous page.)
Air Velocity Measurement Screen
Session Run Time
Summary Session
Air Velocity
To view air velocity measurements, perform or verify the following:
1. The air velocity probe is enabled in
Setup\AUX\Air Velocity
screen.
2. Connect the air velocity probe and attachment to the EVM unit to the auxiliary Air probe inlet.
(See Air Probe inlets diagram in previous section, “Particulate Air Flow”.)
3. Turn Air Velocity Probe switch
On
.
4. Navigate to the
Air Velocity
measurement screen using keys.
Viewing Logged sessions (past sessions)
Once you have logged data and stopped the session, the data is stored under the past session summary
menu. (Optional: you can view the data in charts/graphs when downloaded to DMS.)
1. Navigate to
Start \Past Session
screen.
2. Select the
File
field and press the
File
softkey. (
Past Session\Load File
screen will display all of the
logged files.) Press
Enter
key to change between different file views.
3. Select the appropriate file (by using up/down arrows) and press the
Load
softkey.
4. Press
Detail
softkey to view data.
5. Press keys to view summary data.
Repeat as necessary.
