![background image](http://html1.mh-extra.com/html/quest-engineering/dr4300e/dr4300e_owners-manual_772522146.webp)
DR4300 Owners Manual
Installing the hard drive backplane
146
See also:
Removing the cooling fan assembly
See also:
Installing the hard drive backplane
See also:
Installing the cooling fan assembly
See also:
See also:
After working inside your system
Related references
See also:
Installing the hard drive backplane
1. Follow the safety guidelines listed in the Safety instructions section.
2. Follow the procedure listed in the Before working inside your system section.
CAUTION:
Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is not
authorized by Dell is not covered by your warranty. Read and follow the safety instructions that are
shipped with your product.
CAUTION:
To prevent damage to the control panel flex cable, do not bend the control panel flex
cable after it is inserted into the connector.
1. Use the hooks on the chassis as guides to align the hard drive backplane.
2. Lower the hard drive backplane until the release tabs snap into place.
3. Connect the SAS/SATA/SSD data, signal, and power cable(s) to the backplane.
Figure 74. Installing the 3.5 inch (x12) SAS/SATA backplane
a. release tab (2)
b. SAS cable A2
Содержание DR4300e
Страница 1: ...DR4300e System Owner s Manual ...
Страница 181: ...DR4300 Owners Manual 181 Index ...