DL4300 Appliance
Configuring an email notification template
136
Option
Description
TLS
Select this option if the mail server uses a secure
connection such as Transport Layer Security (TLS)
or Secure Sockets Layer (SSL).
5.
For each setting, when satisfied with your changes, click
to save the change and exit edit mode, or
click
to exit edit mode without saving.
CAUTION:
If you do not confirm each change, your settings will not change.
6. Click Send Test Email and then do the following:
a. In the Send Test Email dialog box, enter a destination email address for the test message and
then click Send.
b. If the test message fails, exit the error dialog box and the Send Test Email dialog box, and revise
your email server configuration settings. Then send the test message again.
c. Once the test message is successful, click OK to confirm the successful operation.
d. Check the email account to which you sent the test email message.
Parent topic
Configuring an email notification template
When you enable notifications of Rapid Recovery events by email, a default template is created for you by default.
The SMTP email server defined for the Core uses this template to send notifications regarding Rapid Recovery
events by email.
This topic describes the process of configuring the default email notification template or customizing the content.
Using the Restore Default option, you can restore changes to the default notification template at any time.
CAUTION:
Modify the template at your own risk. You are responsible for testing any modifications to the
template. Only the default template is supported.
Complete the steps in this procedure to configure an email notification template.
NOTE:
You must also configure an email server and notification group settings, including enabling the
Notify by email option, before email alert messages are sent. For more information about configuring an
email server for sending alerts, see
. For more information on specifying events
Configuring notification groups
.
1. Navigate to the Rapid Recovery Core Console.
2.
On the icon bar, click (More), and then select
Notifications.
The Notifications page appears.
3.
In the Email Settings pane, click
Change.
The Edit Email Notification Configuration dialog box appears.
4. Select Enable Email Notifications.
The email template is enabled and is visible. The values of the default email template are described in the
following step.
5. Review the contents in the Edit Email Notification Configuration dialog box and determine if the default
content suits your needs.
Содержание DL4300
Страница 1: ...DL4300 Appliance User Guide...