16
Figure 4
Takeup lever guard removed for photos only.
Never run the machine without the guard in
place, extreme head injury may occur.
Figure 5
Figure 6
5.
Take thread between the two tension discs from back to
front all the way around. Up and over the check spring. Be
sure the thread is going between the discs and go far enough to
catch the check spring. The check spring should come down
as you pull thread. Pull thread tightly to ensure the thread is in
the tension disk.
Figure 4
6.
Thread runs under silver angle bracket. See picture for
details.
Figure 4
7.
Bring the thread up through the thread guide just
above the check spring.
Figure 4
8.
Take thread through the take up lever from back to
front.
Figure 5
9.
Bring the thread down through the two thread
guides on the left side.
10.
Bring the thread through the thread eyelet directly above
the needle.
Figure 6
11.
Thread the needle front to back.
Figure 6
TIP:
Use a dental floss threader to thread the guide directly above the needle. The threader will also
thread your needle.
Содержание Sewing Machine
Страница 1: ...Owner s Manual ...
Страница 25: ...25 ...
