UMTS/HSPA Module Series
WCDMA UGxx FTP AT Commands Manual
WCDMA_UGxx_FTP_AT_Commands_Manual Confidential / Released 28 / 44
2.14. AT+QFTPLEN Get the Transferred Data Length
Get the transferred data length on FTP server.
Parameter
<transferlen>
Integer type, the transferred data length on FTP server. When executing
AT+QFTPPUT, AT+QFTPGET, AT+QFTPNLST or AT+QFTPLIST, you can query
the transferred data length by AT+QFTPLEN
<err>
Integer type, indicates the operation error code. It is the type of error (Please refer
to the Chapter 4)
2.15. AT+QFTPSTAT Get the Status of FTP Service
Get the status of FTP service.
the Chapter 4)
<protocol_error>
Integer type, for reference only, indicates the original error code from FTP server
which is defined in FTP protocol (Please refer to Chapter 5). If it is 0, it is meaningless
AT+QFTPLEN Get the Transferred Data Length
Test Command
AT+QFTPLEN=?
Response
OK
Execute Command
AT+QFTPLEN
Response
OK
+QFTPLEN: 0,<transferlen>
or
+CME ERROR: <err>
AT+QFTPSTAT Get the Status of FTP Service
Test Command
AT+QFTPSTAT=?
Response
OK
Execute Command
AT+QFTPSTAT
Response
OK
+QFTPSTAT: 0,<ftpstat>
Quectel
Confidential
