
UMTS/HSPA Module Series
UC20 EVB User Guide
UC20_EVB_User_Guide Confidential / Released 13 / 30
3
Interface Application
This chapter describes the hardware interfaces of UC20 EVB, shown as follows:
Power interface
USB interface
Audio interface
SIM card interface
UART interface
It also provides information about LEDs, buttons and test points to help you use the UC20 EVB.
3.1. Power Interface
The power supply of UC20 EVB could come from the external input which is connected with power jack
on the EVB board. The power jack not only connects a step-down converter which can provide the supply
voltage (VBAT) required for operating EVB and UC20-TE-A module, but also provides a correct voltage
(VDD_3.3) after a LDO power is supplied to UC20 Mini PCIe module.
Figure 4 shows the simplified power supply schematic, and Figure 5 shows the power interface of UC20
EVB.
J201
S201
Power
supply
Power
switch
Step-down converter
U201
AAT2138
U701
MIC29302WU
LDO
J702
VDD_3.3
Power supply to
UC20 Mini PCIe
J102
VBAT
Power supply to
UC20-TE-A
1.8V
3.3V
U202
LDO
U203
LDO
Figure 4: Simplified Power Supply Schematic
Quectel
Condidential
Produkt dostpny w sklepie www.Soyter.pl <--- kliknij