Quectel UC15 Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 73

Quectel UC15 Скачать руководство пользователя страница 12

UMTS/HSDPA Module

UC15 Hardware Design

UC15_Hardware_Design Confidential / Released 11 / 72

SMS

Text and PDU mode.
Point to point MO and MT.
SMS cell broadcast.
SMS storage: ME by default.

USIM Interface

Support USIM card: 1.8V, 3V.
Support USIM and SIM.

Audio Features

Support two analogy input channels and two analogy output channels.
GSM: HR/FR/EFR/AMR.
WCDMA: AMR.
Echo cancellation and noise suppression.

UART Interface

Seven lines on UART interface.
Support RTS and CTS hardware flow control.
Baud rate can reach up to 460800bps, 115200 bps by default.
Used for AT command, data transmission .

USB Interface

Compliant with USB 2.0 specification (slave only), the data transfer
rate can reach up to 480 Mbps.
Used for AT command communication, data transmission, software
debug and firmware upgrade.
USB Driver: Support Windows XP, Windows Vista, Windows7,
Windows 8, Windows CE5.0*/6.0*, Linux 2.6/3.0, Android 2.3/4.0.

AT Commands

Compliant with 3GPP TS 27.007, 27.005 and Quectel enhanced AT
commands.

Network Indication

Indicate network connectivity status.

Antenna Interface

Connected via 50 Ohm antenna pad.

Physical Characteristics

Size: 29.0±0.15 × 29.0±0.15 × 2.5±0.2 mm.
Weight: approx. 6 g.

Temperature Range

Normal operation: -40°C ~ +80°C.
Restricted operation: -45°C ~ -40°C and +80°C ~ +85°C 1).
Storage temperature: -40°C ~ +90°C.

Firmware Upgrade

USB interface(by default) .

RoHS

All hardware components are fully compliant with EU RoHS directive.

1.

1)

means

when the module works within this temperature range, RF performance might degrade. For

example, the frequency error or the phase error would increase.

NOTES

«
...
10
11
12
13
14
...
»

Содержание UC15










































































Отзывы:

Нет отзывов