Quectel SC690A Series Скачать руководство пользователя | Manualshive

Страница: 2 / 110

background image

Smart Module Series

SC690A_Series_Hardware_Design 1 / 105

At Quectel, our aim is to provide timely and comprehensive services to our customers. If you

require any assistance, please contact our headquarters:

Quectel Wireless Solutions Co., Ltd.

Building 5, Shanghai Business Park Phase III (Area B), No.1016 Tianlin Road, Minhang District,

Shanghai 200233, China

Tel: +86 21 5108 6236

Email: [email protected]

Or our local offices. For more information, please visit:

http://www.quectel.com/support/sales.htm.

For technical support, or to report documentation errors, please visit:

http://www.quectel.com/support/technical.htm.

Or email us at: [email protected].

Legal Notices

We offer information as a service to you. The provided information is based on your requirements and

we make every effort to ensure its quality. You agree that you are responsible for using independent

analysis and evaluation in designing intended products, and we provide reference designs for illustrative

purposes only. Before using any hardware, software or service guided by this document, please read this

notice carefully. Even though we employ commercially reasonable efforts to provide the best possible

experience, you hereby acknowledge and agree that this document and related services hereunder are
provided to you on an “as available” basis. We may revise or restate this document from time to time at
our sole discretion without any prior notice to you.

Use and Disclosure Restrictions

License Agreements

Documents and information provided by us shall be kept confidential, unless specific permission is

granted. They shall not be accessed or used for any purpose except as expressly provided herein.

Copyright

Our and third-party products hereunder may contain copyrighted material. Such copyrighted material

shall not be copied, reproduced, distributed, merged, published, translated, or modified without prior

written consent. We and the third party have exclusive rights over copyrighted material. No license shall

be granted or conveyed under any patents, copyrights, trademarks, or service mark rights. To avoid

ambiguities, purchasing in any form cannot be deemed as granting a license other than the normal non-

exclusive, royalty-free license to use the material. We reserve the right to take legal action for

noncompliance with abovementioned requirements, unauthorized use, or other illegal or malicious use of

the material.

«
1
2
3
4
...
»

Содержание SC690A Series















































































































Отзывы:

Нет отзывов

Похожие инструкции для SC690A Series

Бренд: Paradyne Страницы: 2

Бренд: Meru Networks Страницы: 66

Бренд: CNET Страницы: 2

C2000-A2-SMD4240-AC5

Бренд: KonNad Страницы: 12

Бренд: APM Страницы: 2

7000AP - Air Xpert - Wireless Access Point

Бренд: D-Link Страницы: 8

Бренд: Linksys Страницы: 25

Bluetooth CE Bus PhoneDongle

Бренд: Motorola Страницы: 17

Бренд: Motorola Страницы: 2

Бренд: Motorola Страницы: 1

Бренд: Motorola Страницы: 802

Бренд: Motorola Страницы: 1048

Бренд: Motorola Страницы: 836

Бренд: Motorola Страницы: 1090

Бренд: CNET Страницы: 1

Бренд: Wieland Страницы: 33

Бренд: 4IPNET Страницы: 15

Бренд: 4IPNET Страницы: 13

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды