background image

Quectel

 

SC20 Series  

Multi-mode Smart LTE Module 
with Wi-Fi & Bluetooth 

 

SC20 series is Quectel’s new generation of multi-mode Smart LTE Cat 4 module. It contains five variants with built-in Android 
OS: SC20-E, SC20-A, SC20-AU, SC20-J and Wi-Fi & BT only version SC20-W. Additionally, it contains five variants with built-in 
Yocto Linux OS: SC20-EL, SC20-AL, SC20-AUL, SC20-JL and Wi-Fi & BT only version SC20-WL.  

SC20 series module delivers maximum data rates of up to 150 Mbps downlink and 50 Mbps uplink based on LTE network, and        
supports  wireless  communication  via  IEEE  802.11a/b/g/n  and  BT  4.2  LE.  It  is  an  ideal  solution  for  both  industrial  and           
consumer  applications  requiring  high  data  rates  and  high-speed  Internet  access.  The  module  is  backward-compatible  with 
existing EDGE and GSM/GPRS networks, ensuring connection even in remote areas devoid of 3G or 4G coverage.  

SC20 series module supports multiple-input multiple-output (MIMO) technology. The use of multiple antennas at the receiver 
end at the same time and on the same frequency band greatly minimizes errors and optimizes the data speed. The module 
also combines high-speed wireless connectivity with embedded multi-constellation and high-sensitivity GNSS (GPS, GLONASS, 
Galileo and BeiDou) receiver for positioning.  

A rich set of interfaces (such as LCM, Camera, Touch Panel, MIC, SPK, UART, USB, I2C)  extend the applicability of the module 
to  a  wide  range  of  M2M  applications,  such  as  MID,  PND,  POS,  router,  data  card,  in-vehicle  solutions,  smartphone,  digital    
signage, security and industrial PDA. 

Key

 

Features

  

 

Integration  of  Android  OS  or  Yocto  Linux  OS,  Wi-Fi,  Bluetooth 

and GNSS  

Worldwide LTE, UMTS/HSPA+ and GSM/GPRS/EDGE coverage 

MIMO  technology which  meets demands for data  rate and link 

reliability in modem wireless communication systems  

Multi-constellation  GNSS  receiver  available  for  applications      

requiring fast and accurate fixes in any environment                                                                  

LCC  +  LGA  package  which  ensures  reliable  connectivity  with  

applications  

Version: 1.9 | Status: Released 

40

.5

 mm

 

40.5 mm 

2.8 mm 

 

 

Smart LTE Cat 4                                           

Max. 150 Mbps (DL)                                         

Max. 50 Mbps (UL)

 

LCC + LGA  

Package

 

Powerful Multimedia 

Functions

 

GPS/GLONASS/

Galileo/BeiDou

 

USB 2.0 High Speed 

Interface

 

BT 4.2  

(BR/EDR + BLE)

 

IEEE 802.11 

a/b/g/n

 

Yocto Linux OS

 

 

Android OS

 

EMAIL US: [email protected]

 

VISIT US: www.quectel.com

 

Содержание SC20-EL


















































Отзывы: