Smart Module Series
SA800U-WF_EVB_User_Guide 58 / 63
5.3. Communication via USB
1. Turn on the module according to the procedures mentioned in
Chapter 5.1
2. Connect SA800U-WF EVB and the PC with USB cable through USB Type-C interface and then run
the driver disk on PC to install the USB driver and ADB driver. The USB port numbers can be viewed
in Device Manager of the PC when the USB driver is installed, as shown below.
Figure 61: USB COM Ports
3. Open CMD tool
For Windows 7: click
“
Start
”
→
“
All Programs
”
→
“
Accessory
”
→
“
Command Prompt
”.
For Windows 10: (option 1) click "
Start
"
→
"
Operate
"
→
input "
cmd
", then click "
Enter
";
(option 2) click "
Start
" and input "
cmd
" in the searching box, then click "
cmd.exe
".
4. Execute the command
“
adb shell
” to enable the module enter into ADB mode. Then developers can
use USB ADB interface for testing.
Figure 62
: “adb shell” Command
Содержание SA800U-WF
Страница 1: ...SA800U WF EVB User Guide Smart Module Series Version 1 0 Date 2022 06 23 Status Released...
Страница 13: ...Smart Module Series SA800U WF_EVB_User_Guide 12 63 Figure 2 Bottom View Figure 2 Bottom View...
Страница 62: ...Smart Module Series SA800U WF_EVB_User_Guide 61 63 1 2 3 4 5 6 7 Figure 65 Firmware Upgrade Steps...
