![Quectel LTE Standard Module Series Скачать руководство пользователя страница 31](http://html1.mh-extra.com/html/quectel/lte-standard-module-series/lte-standard-module-series_hardware-design_3604632031.webp)
LTE Standard Module Series
EG21-G Mini PCIe Hardware Design
EG21-G_Mini_PCIe_Hardware_Design 30 / 54
Table 14: Indications of Network Status (AT+QCFG=
"
ledmode
"
,0, Default Setting)
Pin Status
Description
Flicker slowly (200ms Low/1800ms High)
Network searching
Flicker slowly (1800ms Low/200ms High)
Idle
Flicker quickly (125ms Low/125ms High)
Data transfer is ongoing
Always Low
Voice calling
Table 15: Indications of Network Status (AT+QCFG=
"
ledmode
"
,2)
Pin Status
Description
Low Level (Light ON)
Registered on network successfully
High-impedance (Light OFF)
No network coverage or not registered
W_DISABLE# signal is at low level. (Disable the RF)
AT+CFUN=0
,
AT+CFUN=4
3.8.6. WAKE# Signal
The WAKE# signal is an open collector signal which is similar to RI signal, but a host pull-up resistor and
AT+QCFG="risignaltype","physical"
command are required. When a URC returns, a 120ms low level
pulse will be outputted. The state of WAKE# signal is shown as below.
URC return
120ms
High
Low
(external
pull-up)
Figure 14: WAKE# Behaviors