LTE Module Series
EP06&EG06&EM06 GNSS AT Commands Manual
EP06&EG06&EM06_GNSS_AT_Commands_Manual
10 / 29
2.1.3. AT+QGPSCFG="gpsnmeatype" Configure Output Type of GPS NMEA
Sentences
Parameter
ports as before.
0 Disable
1 Enable
<errcode>
Integer type. The error code of the operation. If it is not 0, it is the type of error.
Please refer to
Chapter 4
for details.
AT+QGPSCFG="gpsnmeatype" Configure Output Type of GPS NMEA Sentences
Write Command
AT+QGPSCFG="gpsnmeatype"[,<gps
nmeatype>]
Response
When there are two parameters:
OK
When the second parameter is omitted, query the current
setting:
+QGPSCFG: "gpsnmeatype",<gpsnmeatype>
OK
If there is any error related to ME functionality:
+CME ERROR: <errcode>
Reference
<gpsnmeatype>
Output type of GPS NMEA sentences by ORed, and the configuration
parameter will be automatically saved to NVRAM. The default value is 31
which means that all the five types of sentences will be outputted.
0 Disable
1 GGA
2 RMC
4 GSV
8 GSA
16 VTG
<errcode>
Integer type. The error code of the operation. If it is not 0, it is the type of
error. Please refer to
Chapter 4
for details.
