GNSS Module Series
LC29H(AA,BA,CA,DA,EA)_EVB_User_Guide 16 / 24
5
Test with QGNSS Tool
This chapter explains how to use the QGNSS software tool
for checking the status of a GNSS receiver.
For more information about QGNSS use, see
document [2]
Download the QGNSS
tool from our website Download Zone, or request it from Quectel Technical Support.
5.1.
COM Port and Baud Rate Setting
Step 1:
Assemble the EVB Accessories.
Step 2:
Flip the Power switch (S201) to ON position to power on the EVB.
Step 3:
Start the QGNSS and click “
Setting
” and “
Serial Port Configuration
” (default baudrate:
115200 bps
2
).
Figure 7: QGNSS Setting
Step 4:
Click the “
Connect or disconnect
” button. The interface shown in the figure below appears
2
UART interface default settings vary depending on software versions. Please see specific software versions for details.
