Quectel FC800L Скачать руководство пользователя страница 13

Страница: 13 / 55

Wi-Fi&Bluetooth Module Series

FC800L_Hardware_Design 12 / 50

This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be

maintained between the antenna and users. The final end product must be labeled in a visible area with the following:

“Contains IC: 10224A-2022FC800L”.

Plaque signalétique du produit final

Ce module émetteur est autorisé uniquement pour une utilisation dans un dispositif où l'antenne peut être installée de telle

sorte qu'une distance de 20cm peut être maintenue entre l'antenne et les utilisateurs. Le produit final doit être étiqueté dans

un endroit visible avec l'inscription suivante: "Contient des IC: 10224A-2022FC800L ".

Manual Information To the End User

The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF

module in the user’s manual of the end product which integrates this module. The end user manual shall include all

required regulatory information/warning as show in this manual.

Manuel d'information à l'utilisateur final

L'intégrateur OEM doit être conscient de ne pas fournir des informations à l'utilisateur final quant à la façon d'installer ou de

supprimer ce module RF dans le manuel de l'utilisateur du produit final qui intègre ce module.

Le manuel de l'utilisateur final doit inclure toutes les informations réglementaires requises et avertissements comme

indiqué dans ce manuel.

RSS-247 Section 6.4 (5) (6) (for local area network devices, 5GHz)

The device could automatically discontinue transmission in case of absence of information to transmit, or operational failure.

Содержание FC800L
























































Результаты поиска

Содержание FC800L

Отзывы:

Похожие инструкции для FC800L

Бренды по названию

Популярные бренды

Quectel FC800L, Руководство пользователя

Результаты поиска

Содержание FC800L

Отзывы:

Похожие инструкции для FC800L

Бренды по названию

Популярные бренды