GV300N User manual
TRACGV300NUM001
- 20 -
Figure 15.
Typical Connection with LED
Note:
1. OUT1 will latch the output state during reset.
2. Many modern relays come with a flyback
diode pre-installed internal to the relay itself. If the
relay has this diode, ensure the relay polarity is properly connected. If this diode is not internal, it
should be added externally. A common diode such as a 1N4004 will work in most circumstances.
3.12.
Device Status LED
Figure 16.
GV300N LED on the Case