Queclink GL300, Руководство пользователя

Страница: 21 / 90

GL300 @Tracker Air Interface Protocol

1: Allow the cells’ information report after failed to get GPS position.

2: Do not report the mRESP:GTGSM if no cell’s information is found.

3: Allow the cells’ information report whatever it gets GPS position or not

< EPB mode >: The mode of External Power Control Unit With Built-in Motion Sensor.

0: disable External Power Control Unit With Built-in Motion Sensor.

1: enable External Power Control Unit With Built-in Motion Sensor.

< LED on >: Configure the working mode of LEDs.

0: Each time after the device powers on or the parameter is updated to 0 from other
values, GPS LED will work for 150 seconds and then turn off deadly. GSM LED and
Power LED work normally.

1: All LEDs work normally.

2: All LEDs are off always except the following cases. The first exception is all LEDs
will work for a period time after power on. The second exception is Power LED will
flash fast during power off procedure. The third exception is Power LED will work
normally for charging status when a charger is inserted in power off state.

< Info report enable >: Enable/disable the device information report
（
+RESP:GTINF
）
function. The device information include state of the device, ICCID, GSM signal strength,
adapter connection status, battery voltage, charging status, Power and GPS LED working
mode, GPS on need setting, GPS antenna type, GPS antenna status, the last known time of
GPS fix.

0: Disable the device information report function.

1: Enable the device information report function.

< Info report interval >: The interval of reporting the device information.

< Location by call >: Configure how to handle the incoming call.

0: Just hang up the call.

1: Hang up the call and report the current position.

< Expiry enable >: Enable or disable the expiry function to stop all the GPS fixing and any
reports.

0: Disable the Expiry function.

1: Enable the Expiry function.

< Expiry time >: The time when to stop all the GPS fixing and any reports. The valid format is
“YYYYMMDDHHMMSS”. The value range of “YYYY” is “2000”-“3000”. The value
range of “MM” is “01”-“12”. The value range of “DD” is “00”-“31”. The value range of
“HH” is “00”-“23”. The value range of “MM” is “00”-“59”. The value range of “SS” is
“00”-“59”It is noticed to use RTC time here.

< Agps mode >: A numeric to indicate whether to enable AGPS. AGPS is helpful to improve
the ratio to get GPS position successfully and reduce the time to get GPS position.

0: Disable the AGPS function.

1: Enable the AGPS function.

< Sleep enable >: Enable or disable the sleep mode when charging.

0: Disable the sleep mode when charging.

1: Do not disable the sleep mode when charging.
Note:
For AGPS function, it is necessary to download AGPS file from the specified URL, so it is
TRACGL300AN001 - 20 -
Queclink
Confidential