2011/05/03 Confidential – QUCIKTE TECHNOLOGY CO., LTD Page 2 of 16
Safety Precautions
Laser Warning
STRICT ATTENTION TO THESE PRECAUTIONS IS IMPORTANT FOR YOUR PROTECTION
WHEN WORKING WITH FIBER OPTIC EQUIPMENT, SOME OF WHICH HAVE LASER
DIODE EMITTERS.
Quickte Technology uses Class I and Class 3b lasers as fiber optic laser diode sources, which are inherently
safe unless mishandled.
Use of optical measuring equipment or procedures other than those specified herein may result in
hazardous radiation exposure.
The radiation from laser diodes is much more intense than other light sources radiation. This intense
radiation can destroy your vision if you bypass proper safety procedures and practices.
As a general rule, do not look into the end of a fiber optic cable unless you are sure it is not connected into
a system, or unless you are sure the equipment is OFF. Note that all Quickte Technology equipment with
lasers are labeled accordingly.
Electrical Safety
The I30 SERIES equipment contains power supplies and other devices that are possible sources of
electrical shock. Caution should be exercised when working around these components.
Equipment Handling
I30 SERIES shelf sometime can be heavy when fully-populated. For your physical safety and to prevent the
possibility of damage to the equipment during installation, you should exercise caution when installing the
I30 SERIES shelf. It is recommended that installers know and use proper lifting procedures as defined in
the OSHA regulations.
Proper Attire
Personnel working around the I30 SERIES equipment should not wear loose or ill-fitting clothing around
the equipment. This includes ties, over-size shirts, or dangling jewelry. Clothing items of these types can
catch on jumpers and disconnect them, catch on system components and cause injury to you, or damage to
the equipment.
Electro-Static Discharge Precautions
