Qucell SC-220, Руководство пользователя

Страница: 39 / 41

Qucell 4G/LTE Small Cell System Manual Version: 0.0.3
Qucell Confidential 39 2018-08-29
Each alarm group is represented by the following LED states which uses Red LED to indicate there are
raised alarms.
LED Name
Alarm Group
Power Internet Service
G G R G R
Group A N/D ON N/D
Group B N/D Blinking N/D
Group C N/D R1/G1 N/D
Group D N/D R2/G1 N/D
Group E N/D R3/G1 N/D
Group F N/D N/D ON
Group G N/D N/D Blinking
Group H N/D N/D R1/G1
Group I N/D N/D R2/G1
Group J N/D N/D R3/G1
* Note: N/D was used to indicate ‘Not dependent on’ which means those LED states doesn’t have an effect on the
Alarm status.
LED states for alarm groups are designed not to have a dependency between each LEDs (Power / Internet
/ Service). By checking the LED states of each LED, the user can know the status of the HeNB. In addition,
if multiple alarms occur from other alarm groups at the same time, LED state of Alarm Group which has
higher priority is displayed. The priority of Alarm Group of Internet LED is Group A is the highest and
Group E is the lowest. The priority of Alarm Group of Service LED is Group F is the highest and Group J
is the lowest.