Recommendations
1) verify that the equipment used to connect our devices to enjoy
all the guarantees required under European law;
2) use the cables, connectors and quality materials for electrical wiring;
3) Products with IP66 degree make the wiring / connections with accessories
provide the same degree IP of the selected product (available in the catalog);
4) In the case of installations outside is not recommended to install the power supplies in the
formwork and / or in the junction box without adequate protection
5) Honey
-
comb louvre must be installed directly from the manufacturer . Please mention it during the order
Choice of installation location
The unit should be positioned so that when in use is not subject to direct radiation from the sun or other heat sources . High temperatures
reduce the life and efficiency of the components or the LED module .
Note on corrosion protection
For installation and maintenance be especially careful not to damage the coating powder . Damage combined action of water could cause
corrosion.
-
In the case of damage to the external flexible cable, it must be replaced by the manufacturer, or its assistance service, or equivalent quali-
fied personnel in order to avoid dangers
Use only supply cables with
double case
Do not use water high
pressure cleaners
QUBO MEDIUM HP
-
Power consumption : 20W
-
Voltage : 220
-
240V 50
-
60Hz
-
Color Temperature : 3000K
-
4000K
-
Beam angle : 4°
-
10°
-
28°
-
Insulation class: I
-
IK rating : IK10
-
IP protection: IP66
-
Gross weight: 3.1kg
COD. 101606
QUBO MAXI HP
-
Power consumption : 38W
-
Voltage : 220
-
240V 50
-
60Hz
-
Color Temperature : 3000K
-
4000K
-
Beam angle : 4°
-
10°
-
28°
-
Insulation class: I
-
IK rating : IK10
-
IP protection: IP66
-
Gross weight: 4.5kg
COD. 101607
