QubicaAMF Edge String, Руководство пользователя

Страница: 58 / 210

Owner’s Manual
400-051-202-01 Rev. B Page 2-26
Text Sub-Menu
The Text sub-menu displays a list of critical machine components that are monitored by
the system controller during normal operation. This menu can be useful when
troubleshooting a machine error. Table 2-4 lists all monitored components and their
possible states.
Table 2-4, Text Sub-Menu
Component Possible States Additional Information
Backend Breaker OK, Tripped Not applicable
Backend Motor On, Off, Asleep Not applicable
Ball Detector Ball, No Ball Displays current input state to system controller
from ball detector
Ball Lift On, Off, Asleep Displays current input state to system controller
from front ball return. Asleep is a state in which
ball lift motor turns off after a period of inactivity.
Ball Sensor - Not applicable
Drive Encoder 0 to 1250/Valid/Invalid Displays current drawbar motor encoder count.
Invalid indicates either an out-of-range value or
home position has not been set.
Encoder Sensors - Not applicable
Drive RPM/CMD -900 to 1800 Displays rotational speed that machine controller
is asking drawbar motor to operate.
E-Stop Loop Closed, Open Displays current E-Stop loop status.
Foul Detector Foul, No Foul Displays current input state to system controller
from foul detector
Home (LOS) Home, Not Home Indicates whether drawbar is at pin stabilization
position
Lane Breaker OK, Tripped Not applicable
Mask Light On BALL 1, BALL1/BALL2 Displays current output state from system
controller to mask light unit
Mechanic Call On, Off On if Mechanic Call button is pressed
Pin Encoder XX, XX, XX, XX, XX,
XX, XX, XX, XX, XX Displays current count of all pin string encoders
Software VX.XX Displays installed software version
Stack Lights
Grn = Red = - Not applicable
Tenth Frame On, Off On if Tenth Frame button is pressed