QubicaAMF 90XLi, Дополнение к руководству

Страница: 24 / 42

QubicaAMF 90XL
i
PINSPOTTER
400-088-012 Page 2-10 Rev. Date 11/06
Figure 2-12
2.8 Distributor Trip Lever
1. Operate the distributor trip lever. Inspect for mechanical binds in the lever and
associated linkage. Check that the rollers turn freely.
2. As a pin transfers from the distributor belt onto the trip lever, the weight of the pin
causes the lever to pivot downward as the pin is deposited in the bin. Afterwards,
the trip lever returns to the up position from the force of a spring located at the rear
of the carriage tube (see Figure 2-13). This tripping and resetting action actuates
the trip rod allowing the distributor to index to the next bin position. The spring
tension is factory set for 1/2 turn. Too much spring tension would prevent the trip
lever from deflecting causing the distributor to fail to index.
Figure 2-13
Cable Assembly
Trip Rod Tube
DISTRIBUTOR 3
DISTRIBUTOR 3
Spring
Trip Lever
DISTRIBUTOR TRIP L EVE R
DISTRIBUTOR TRIP LEVER