Qubic System QS-CH2, Руководство пользователя

Страница: 9 / 31

QS-CH2
How to turn on safely and use the QS-CH2 :
■
Check if everyone around is aware of machine rapid movements.
■
Make sure that no one stands in the range of motion (minimum 1.5 m).
■
Kids should be kept away from the machine.
■
Pets should be kept away from the machine.
■
When the QS-CH2 is turned on, it performs start-up calibration.
WARNING
QS-220-PL will move automatically after turning it on in order to perform start up
procedure. Please be away of that movement and do not try to interrupt it.
■
DO NOT
interrupt or change the weight of payload mounted to the QS-CH2 during
start-up calibration.
To check if the platform is in the Motion Lock mode look at the main window of
the QubicManager. Status is visible in the lower left corner of the window:
–
For VR Headset users:
* Remove the VR goggles before entering or exiting the rig.
* Check very carefully if cables from VR Headset are not limiting the oper-
ation range of QS-CH2 .
* Check if the whole VR setup is not in range of motion of the machine.
* Check if cables are protected from being crushed by the QS-CH2 –
DO
NOT
place them loosely under the motion rig.
User Manual R1.0 4