PiXtend
Construction manual:
PiXtend V1.3 ARTC
Kit Assembly
In the initial operation manual you are getting reminded to check the position of the
components. At the transport of the assembly kit sometimes it can happen that a
components is getting bent that it is touching another component.
If this is recognized early (before the first operation) it is no problem. You can make this
check at this point too, before you are mounting the Raspberry Pi and restrict the view.
Your PiXtend now is ready for the “marriage” with the Raspberry Pi Model 2 B.
The following steps are valid equally to the model 3 B / B+.
www.pixtend.de
Copyright by Qube Solutions UG (limited liability)
20 / 24
Figure 11: PiXtend ready for the marriage
