COCOON
54F01-0400xXL
4. Assembling the wardrobe
Quax nv
Karel Picquélaan 84 B-9800 Deinze Belgium
T
T
0032 9 380 80 95 www.quax.eu -
E
E
35
Step 4.1
: Use the left side
1
, the right side
2
, eight
wooden dowels
E
, four connectors
F
, six hinge moun-
ting plates
R
, four rod holders
S
, eight wood screws
A
and twelve shelf supports
T
Tighten the connectors (
F
) in the drillings on top of the
sides (
1
and
2
). Push two wooden dowels (
E
) into the
holes at the top and bottom of the sides. Push three
hinge mounting plates (
R
) into the holes at the front of
the left side. Push three hinge plates (
R
) into the dril-
lings at the front of the right side. Place the rod holders
(
S
) on the drillings in the middle of the sides. Attach the
supports with two wood screws (
A
). Push the shelf sup-
ports (
T
) into the holes of the sides.
Step 4.2
: Use the right intermediate side
3R
, four wooden
dowels
E
, a slider
L
, nine wood screws
A
, two push systems
H
, four wood screws
I
, two rod holders
S
, eight shelf supports
T
and four hinge mounting plates
R
Push two wooden dowels (
E
) into the drillings at the top and
bottom of the intermediate side (
3R
). Disassemble the slider
(
L
). Place the outer slider on the holes on the left side of the
intermediate side. Attach the slider with
fi
ve wood screws (
A
).
Note the detail. Disassemble the push systems (
H
) Place the
mounting plates with the lip (
see red arrow
) facing backward,
on the drillings above and under the slider. Attach the mounting
plate with two wood screws (
I
). Push the systems back onto
their holders. Push two shelf holders (
T
) into the drillings on the
left side of the intermediate side. Push six shelf holders (
T
) into
the drillings on the right side of the intermediate side. Place the
rod holders (
S
) on the drillings in the middle of the right side of
the intermediate panel. Attach the holder with two wood screws
(
A
). Push the four hinge mounting plates (
R
) into the holes on
the left side of the intermediate panel.
