COCOON
54F01-0400x
4. Assembling the wardrobe
Quax nv
Karel Picquélaan 84 B-9800 Deinze Belgium
T
T
0032 9 380 80 95 www.quax.eu -
E
E
35
Step 4.1
: Use the left side
1
, the right side
2
, eight
wooden dowels
E
, ten connectors
F
, one slider
L
, se-
ven hinge mounting plates
R
, two rod holders
S
, nine
wood screws
A
and two shelf supports
T
Tighten eight connectors (
F
) in the drillings of the left
side (
1
). Tighten two connectors (
F
) in the holes at the
top of the right side (
2
). Push two wooden dowels (
E
)
into the holes at the top and bottom of the sides (
1
and
2
). Disassemble the slider (
L
). Place the outer slider
on the drillings of the left side. Attach the slider with
fi
ve wood screws (
A
). Note the detail. Push four hinge
mounting plates (
R
) into the holes at the front of the
left side. Push three hinge plates (
R
) into the drillings
at the front of the right side. Place the rod holders (
S
)
on the provided drillings in the middle of the right side.
Attach the support with two wood screws (
A
). Push two
shelf supports (
T
) into the provided holes at the bottom
of the left side.
Step 4.2
: Use the intermediate side
3
, four wooden dowels
E
,
the other slider
L
, nine wood screws
A
, two push systems
H
,
four wood screws
I
, two rod holders
S
and two shelf supports
T
Push two wooden dowels (
E
) into the drillings at the top and
bottom of the intermediate side (
3
). Disassemble the slider (
L
).
Place the outer slider on the holes on the left side of the inter-
mediate side. Attach the slider with
fi
ve wood screws (
A
). Note
the detail. Disassemble the push systems (
H
) Place the mount-
ing plate with the lip (
see red arrow
) facing backward, on the
drillings above and under the slider. Attach the mounting plates
with two wood screws (
I
). Push the systems back onto its hold-
er. Push two shelf holders (
T
) into the drillings at the bottom left
side of the intermediate side. Place the rod holders (
S
) on the
drillings in the middle of the right side of the intermediate panel.
Attach the holder with two wood screws (
A
).
