COCOON
54F01-0300x
4. Assembling the chest of drawers
Quax nv
Karel Picquélaan 84 B-9800 Deinze Belgium
T
T
0032 9 380 80 95 www.quax.eu -
E
E
29
Step 4.1
: Use the left end side
1
, the right end side
2
, eight
wooden dowels
E
, four mini
fi
x
G
, two connectors
F
, three pairs
of sliders
L
and twenty wood
screws
A
.
Tighten two connectors (
F
) in
the drillings in the middle of the
right-hand end side (
2
). Push
two wooden dowels (
E
) into the
holes at the top and bottom of
the end sides (
1
and
2
). Push
two mini
fi
x (
G
) into the drillings
on the top of the end sides. Dis-
assemble the sliders (
L
). Place
four outer parts on the drillings
of the end sides (
1
and
2
). At-
tach each part with
fi
ve wood
screws (
A
). Note the detail.
Step 4.2
: Use the left end side
1
of step
4.1
, the intermediate side
3
, two wooden dowels
E
, two mini
fi
x
G
, the rest of the
sliders
L
, ten wood screws
A
, two push systems
H
and four wood screws
I
Push two wooden dowels (
E
) into the drillings on top of the intermediate side (
3
). Push two mini
fi
x (
G
) into the holes at the
top of the intermediate side. Disassemble the sliders (
L
). Place two outer parts on the drillings of the intermediate side.
Attach each parts with
fi
ve wood screws (
A
). Note the detail. Disassemble the push systems (
H
) Place the mounting plate
with the lip (
see red arrow
) facing backward, on the holes under the sliders of the left end side (
1
). Attach each mounting
plate with two wood screws (
I
). Push the system back onto its holder.
Ensure that the wood screws (
A
) for
fi
xing the sliders are screwed perpendicularly into the drilling.
Screw heads that are slanted in the slider
can hinder the drawer operation.
