Quattro RazorLED RAZ-WR96 Скачать руководство пользователя страница 3

Страница: 3 / 4

RAZ-WR96 HOOKUP GUIDE

Option 2

Cut Stri p a nd use

8MM-EZ

connector

5. Cut the connection wire to desired length and route to
LED strip location. Strip wire back 3/16" and insert into the

Female barrel connector terminals. (Red to

and Black to -)

Tighten screws down with Philips screwdriver

5. Route wire from receiver barrel plug to LED strip. Connect

to strip using Option 1 or Option 2. (See the 8MM-EZ guide
for detailed cutting and connecting instructions)

7. Verify that all connections polarity are correct
(Red to

and Black to -}

9. Plug in the power supply and proceed to the
pairing instructions

8. Connect the male end of the power supply to the

Female plug cable.

Watch the Video

www.veraled.com

Содержание RazorLED RAZ-WR96

Страница 1: ...l the receivers in the same zone like zone 1for example or 2 have each receiver s in a different zone like Zone 1 2 3 or 4 2 In order for each receiver to know what Zone it belongs to you will need to...

Страница 2: ...ade screwdriver Connect the male and female plugcables orconnectionwire Tighten4 screws Redwire Blackwire 3 Attach cover with Phillips screwdriver Donotovertighten 4 Attach thefemale barrel connector...

Страница 3: ...n screws down with Philips screwdriver 5 Routewirefrom receiver barrelplugtoLEDstrip Connect to strip using Option 1 or Option 2 See the 8MM EZ guide fordetailedcuttingandconnectinginstructions 7 Veri...

Страница 4: ...se In ordertodothis youneedtopoweruptheunitwiththe LED lights hooked toit 3 Reset the receiver by pressing and holding the Learning button until the lights blink 2 times 4 To pair you need to quickly...