background image

QUATRO

 

Air Technologies Inc. 

Fresh Air Purifiers

-----------------------------------------------------------------------------------------------

We Make Clean Air

 

3

9.0 OPERATION 

For your convenience, the 

AF Purifier 

is equipped with a pressure gauge recessed within the control panel to allow for a visual indication of filter 

pressure (optional on the AF600 model).  IN THE EVENT OF HIGH FILTER PRESSURE (1.5 to 1.6"wc), CALL YOUR DEALER IMMEDIATELY TO 
REPLACE YOUR FILTERS. 

9.1 

POSITIONING OF UNIT 

Mounted on four casters, the unit can be wheeled virtually anywhere in the room for optimal convenience. The unit is designed in an up-flow 
configuration allowing the air to create a "sweeping" effect across the room. The clean air is released from top of unit, moving across the room in a 
downward motion. The clean air pushes particulate and gaseous matter towards the floor level and draws it in the intake grille located at bottom of 
unit. This configuration allows the particles which have already accumulated towards the ground to be pulled towards the return air grille. This results 
in a very effective means of space cleaning. The 

Fresh-Air Purifier

 is more efficient the closer it is placed to its intended source. Conversely, the 

unit's efficiency is diminished as it is placed further from the source of pollutants. 

 

9.3 

REDUCTION IN AIRFLOW 

The 

AF Purifier

 is designed to operate at a clean filter pressure of between 0.9 and 1.1". This reading can be observed on the pressure gauge 

located in the control panel (while operating at HIGH speed).  As the unit cleans the air, the filters are removing the particles of dust and dirt in the air 
stream.  As the filters accumulate dirt (both visible and microscopic), a restriction on the blower/motor is created.  As the restriction becomes greater, 
the air capacity delivered by the blower decreases rendering the unit less effective.  IT IS VERY IMPORTANT TO CHANGE FILTERS ON A 
REGULAR BASIS.  The following is a chart showing the reduction in airflow as the filter restriction increases. 
Pressure   

% Decrease 

Pressure   

% Decrease 

0.9 - 1.1"   

0% 

 

1.1 - 1.3"   

20% 

1.3 - 1.5"   

38% 

 

1.5 - 1.7"   

54% 

 9.4 

TROUBLESHOOTING 

GUIDE 

Symptoms 

Possible Cause 

Suggested Solution 

Unit will not start 

o Faulty Power supply 
o Return or supply grille blocked 
o HEPA filter improperly installed 
o Blown fuse 
o Unit not plugged into receptacle 

o Check breaker box 
o Remove obstruction 
o See Section 7.2 
o Replace fuse 
o Plug unit in 

Excessive noise 

o Blower wheel contacting cone 
o Fan isolators loose or off 

o Realign/replace wheel 
o Replace isolator 

Insufficient airflow 

o Obstruction in system 
o Clogged filters 

o Remove obstruction 
o Replace filters 

Excessive airflow 

o Filters not in place 

o Install filters 

9.0 WARRANTY 

QUATRO Air Technologies warrants its equipment to be free from defect in material and workmanship under normal use and service for a period 
of one year from date of shipment.  QUATRO's obligation under this warranty shall be limited to replacing any parts, thereof, which shall be 
demonstrated to have been defective.  This is expressly in lieu of all other warranties, express or implied, including the warranties of 
merchantability and fitness. 
QUATRO claims no warranty as to merchantability or as to the fitness of the merchandise for any particular use and shall not be liable for any 
loss or damage.  No person, firm or corporation is authorised to assume for QUATRO any other liability in connection with the sale of these 
goods.  Equipment, parts and material manufactured by others and incorporated in QUATRO's equipment are warranted by QUATRO only to the 
extent of the original manufacturer's liability to QUATRO Air Technologies Inc. 
Conditions and Limitations: 

This warranty does not cover

 abuse, misuse, maintenance negligence, improper assembly, acts of vandalism, acts of God, fear wear, 

modifications of the equipment or installation of a part not recommended by QUATRO Air Technologies, as well as operation of the equipment at 
voltages other than those specified by QUATRO Air Technologies Inc. 

10.0 

COMMON SPARE PARTS, To ALL FreshAir Purifier MODELS 

Qty Description 

Part 

Qty Description  Part 

Qty  Description  Part 

Door Fastener Assembly 

A006 

Rubber Fan Isolators 

B022 

Pressure Gauge 

E010 

1/8" Gasket Roll (40') 

H006 

1/16" Gasket Roll (40') 

H007 

 

 

 

 

Отзывы: