Quatech QTM-8524 Manual
21
QTM-8524: 2.4 GHz RS-232/RS-485 to RF Converter
RF Communication Transceiver
Frequency Band:
2426 to 2458 MHz
Channel Spacing:
2.048 MHz (8 Channels jumper select)
Peak Output Power:
28.5 dBm ±2 dB (.707 watts)
Modulation:
Gaussian Minimum Shift Keying (GMSK)
Time Division Duplexing
Transmission Range:
RS-232
Line of Sight: .35 miles
Semi-Open: 150 ft.
Direct Sequence Spread Spectrum
Non-Overlapping Channels:
8 Channels, Jumper selectable
(Full-Duplex Mode Only)
Modes of Operation:
Full Duplex or Half Duplex, Jumper selectable
Communication:
Asynchronous or Synchronous, Jumper selectable
Serial Communication Interface
RS-232 (TxD, RxD, GND) or RS-485 (D+, D-), Jumper selectable
Baud Rate:
600 bps to 57.6 kbps, Jumper selectable
Environments
Operating Temperature:
0 °C to 50 °C
Storage Temperature: -3
0 °C to 70 °C
Power Supply
Vs:
+10V to +30V DC Unregulated
Power Consumption:
1.5W
2.2
QTM-8524 Module Specifications
Note:
The QTM-8524 must operate in full-duplex,
synchronous mode in order to be used with
QTM-8000 Series data acquisition and signal
conditioning modules.
