background image

May/07

                                                                         

MN2000000068

 

 

4

4.

 

Insert the Driver CD, type in the following path 

D:\Drivers\PCIExpress\QS-PCIE-100\2000

, then click 

OK

(Change 

D: 

to match your CD-ROM driver letter)

 

5.

 

Click 

Next 

and 

Finish

.

 

6.

 

Restart Windows to complete the installation.

 

 

For Windows® XP 

1.

 

At the 

Found New Hardware Wizard

, select 

Install from a list 

or specific location (Advanced)

, then click 

Next

2.

 

Insert the Driver CD, check 

Include this location in the search, 

uncheck the other box, type in the following path 

D:\Drivers\PCIExpress\QS-PCIE-100\XP

, then click 

OK

(Change 

D: 

to match your CD-ROM drive letter) 

3.

 

If the 

Hardware Installation 

window pops up, click 

Continue 

Anyway

, then 

Finish

. Our driver has been thoroughly tested for 

stability and compatibility. 

4.

 

Repeat steps 

1-3 

five more times. 

5.

 

Restart Windows to complete the installation. 

 

 

For Windows® Server 2003 

1.

 

At the 

Found New Hardware Wizard

, select 

Install from a list 

 

Содержание QS-PCIE-100








Отзывы: