Quatech Freedom USB Adapter User’s Manual
Installing the software
Figure 26 - Win Me Finished installing prompt
Figure 26 shows the Win Me
Finished installing prompt.
This prompt displays at the
end of the installation process.
Step
Procedure
Description
Step 10
Click the Finish button.
The wizard briefly displays Unknown
hardware found and Installing
messages as it installs the serial ports.
When the desktop displays, your
Freedom USB installation is complete!
Uninstalling from Windows Me
Follow these steps in the event that you need to uninstall or reinstall
the Freedom USB software.
1. From the Control Panel, select System.
2. Select the Device Manager tab.
3. Expand
Multifunction
adapters.
4. Highlight Quatech Freedom USB; for example, QSU-100 USB-to-
Serial Converter. Click Remove.
5. Click OK at the Confirmation screen. Note that this also removes
all the serial ports associated with your Freedom USB.
Rev 2.02 (2/24/2004)
Page 21
