background image

 1998 - 2006, Quatech, Inc.

NOTICE

The information contained in this document cannot be reproduced in any form without

the written consent of Quatech, Inc.  Likewise, any software programs that might accompany this
document can be used only in accordance with any license agreement(s) between the purchaser
and Quatech, Inc.  Quatech Inc. reserves the right to change this documentation or the product to
which it refers at any time and without notice.

The authors have taken due care in the preparation of this document and every attempt

has been made to ensure its accuracy and completeness.  In no event will Quatech, Inc. be liable
for damages of any kind, incidental or consequential, in regard to or arising out of the
performance or form of the materials presented in this document or any software programs that
might accompany this document.

Quatech, Inc. encourages feedback about this document.  Please send any written

comments to the Technical Support department at the address listed on the cover page of this
document.

DOS, Windows ME, Windows 2000, Windows 98, Windows 95, Windows NT are trademarks or registered
trademarks of Microsoft Corporation.  OS/2 is a registered trademark of IBM Corporation.  All other trademarks or

registered trademarks are property of their respective owners.

Содержание DSC-100







































Отзывы: