Rack-Mount RDMS
TM
Telemetry Receiver
53
Quasonix, Inc.
Figure 94: Network Menu, Gateway Setting
4.1.5.8.5 Set Group Security ID
RDMS™ racks may be configured two different ways, depending on the preferred structure. A Group Identifier (ID)
is used to provide a unique name for each RDMS™. In the first configuration, racks may be named based on
department, such as Lab, Development, Production, Demonstration, etc. In the second configuration, racks may be
named for independent users, such as Office1, B4Btest, TestX, etc.
The Set Group Security ID option is located on the Network Menu, as shown in Figure 95. The Group ID can only
be set using this front panel menu.
Figure 95: Network Menu, Set Group Security ID Setting
When the Set Group Security ID option is selected, a
Network Menu
dialog box displays. If you want this rack to
be publicly accessible, leave this entry blank or clear any previous entry using the
Clr
button on the front panel of
the rack.
To add a new Group ID, type a name (up to 16 characters A-Z and/or 0-9). The Up and Down arrow buttons are
used to select alpha characters A~Z and the right arrow button is used to advance to the next cursor position. Use the
numeric buttons to add numbers to the Group ID. Press the
Enter
button to accept changes. Repeat this step to add
or clear additional Group IDs.