Quasonix QSX-RDMS-RM Series Скачать руководство пользователя страница 56 | Manualshive

Страница: 56 / 190

Quasonix QSX-RDMS-RM Series Скачать руководство пользователя страница 56

Rack-Mount RDMS

TM

Telemetry Receiver

41

Quasonix, Inc.

Figure 64: Save Menu, Save Presets

– Slot 1 Full, Slot 2 Empty

To replace or remove an existing save slot, press the CLR key (Clear). After the CLR key is pressed, the display
should show ‘Empty’ indicating the slot can be used again for saving a configuration.

4.1.5.2

Load Rack Presets Menu

The Load Menu allows previously stored configuration settings from the Save Rack Presets screen to be retrieved.
To load saved rack presets, select the appropriate option, as shown in Figure 65, then press the Enter key on the
front panel.

Figure 65: Options Menu, Load Menu Selection

The Load Presets screen, shown in Figure 66, displays eight (8) slots which may contain saved preset
configurations. When a saved configuration file exists, the menu displays the message ‘Available’ next to the load
slot. Use the Up and Down arrow keys to select a load slot with the ‘Available” message displayed. Pressing the
Enter key loads the stored preset and configures the receiver accordingly.

«
...
54
55
56
57
58
...
»

Содержание QSX-RDMS-RM Series































































































































































































Отзывы:

Нет отзывов