Timer Operation
23
Repeat steps 1 and 2 on page 22.
1
CANCEL : ADD / DLT
SELECT 1 - 8 :
ENTER :
END : PROG / ACT I ON
P DT START STOP CH SPD
1 day
day 9 : 00
00p 12
12 : 00
00a 08
08 SP
SP
2 8 10 : 00a 12 : 00p 125 SP
3 10 8 : 00p 9 : 00p 10 SP
4 SU 9 : 00p 10 : 00p L LP
8 SAT
SAT 9:00
00P P 12
12: 00
00A 08
08
TODAY
CATEGORY : MOV I E
----------------------------------------------
DATE START STOP CH
ABC
SP
SE
SELE CT START
START DAT
ATE
SELECT :
SET :
END : PROG / ACT I ON
Press PROG twice (or ACTION)
to exit this mode.
2
3
To Replace program...
To Clear program...
4
Press
to select
the desired program.
1) Press to display.
2) Press
to select
and press or
to set new program
contents.
3) Press PROG (or
ACTION).
Cancel a Timer Recording:
(Recording is in progress)
Hold down STOP for a few seconds
to cancel the Timer Recording.
• Any future daily or weekly recordings
will be performed as programmed.
Press ADD/DLT.
Review, Replace or Clear Program
Contents :
(Recording is not in progress)
• 2 minutes before Timer recording is performed,
“PLEASE PREPARE FOR TIMER REC” appears and/
or the PROG TIMER Indicator flashes. Be sure a
cassette with record tab is loaded and the unit is in
Stop mode.
• If the start times of two programs overlap, the lower
numbered program will have priority.
• If the start time for a Timer Recording comes up during
a normal recording or One Touch Recording (page 14),
the Timer Recording will not be performed.
• If there is a power interruption of more than one minute,
the recording may not be performed or continued.
• If “INCOMPLETE” appears after all items have been
set, check all entries and make necessary corrections.
Notes
SELECT/SET
:CH UP
:CH DOWN
:VOL UP
:VOL DOWN
ADD/DLT
PROG
STOP
P DT START STOP CH SPD
1 -- -- : -- -- : -- -- --
2 8 10 : 00p 12 : 00a 125 SP
3 10 8 : 00p 9 : 00p 10 SP
4 SU 9 : 00p 10 : 00p L LP
SELECT 1 - 8 :
ENTER :
END : PROG / ACT I ON
VV13F1 P22-31Timer-Advanced.p65
01/09/19, 10:49
23
