Quasar Q40FST2, Инструкция по эксплуатации

Страница: 7 / 19

Introduction
Set the TV to turn off after a given amount of time.
Toggles the Electronic Program Guide on or off under DTV source.
Brings up your favorite channel list.
Displays the channel list menu.
(Red/Green/Yellow/Blue) Performs the corresponding function indicated at the bottom of the screen.
Selects picture mode.
Selects sound mode.
Brings up the closed caption menu.
Toggles through the MTS (multichannel television sound) settings.
Note: MTS is only available in TV mode and the options available may vary depending on
the channel’s signal.
(Previous) Goes to the previous chapter.
(Stop) Stops viewing.
(Play/Pause) Starts, pauses or resumes viewing.
(Next) Goes to the next chapter.
Searches backward.
Searches forward.
SLEEP
GUIDE
FAV
CH LIST
Colored buttons
PICTURE
SOUND
CC
MTS
- Aim the remote control towards the TV remote sensor window. The remote control will not function
properly if there are obstructions between the TV and the remote control.
- To ensure good performance, replace the batteries immediately if the remote control is not functioning
normally because the battery is running down.
- Never mix battery types or combine used batteries with new ones.
- When the batteries are low, battery acid may leak and damage the remote control. Once the batteries
are low, replace the batteries as soon as possible.
- If the remote control is not to be used for a long time, remove the batteries to avoid the leakage of battery acid.
- Keep the remote control in dark, dry places. Batteries shall not be exposed to excessive heat such as
sunshine, fire or the like.
Notes about using the remote control