QUARTA RADEX RD1008, Руководство пользователя

Страница: 19 / 28

To switch the «BACKGROUND» off and turn the product to the mode «MEASURE»
without the background it is necessary to switch to the «MENU» (screens 1, 2), select the
section «BACKGROUND» (screen 3), enter the background control screen, set the icon
« » approximately there nearby «OFF» (screen 4).
To return to the «main screen» of the «MENU» press the button «RETURN» 2 times,
the screen «MENU» appears on the display.
Press «RETURN». The «screen RD1008» appears and the mode «MEASURE»
starts. After completing the measurement cycle the display shows the absolute results
regardless of the background.
When you switch off the mode «MEASURE» with the background, the values
obtained during the background evaluation get saved and are reused when switch to the
mode «MEASURE» with the background, if a new background evaluations was not
performed.
The rules and procedure of background dose evaluation are described in the articles
2.3.3., 2.3.4.
d) Section «SETTINGS»
In the «SETTINGS» there are three options: «AUDIO», «VIBRA-CALL» and
«DOSE», which can be turned on or off.
•
OPTION «AUDIO»
The option «AUDIO» is intended to regulate the volume and to mute the ringer – the
signaling.
In the option «AUDIO» you can set the ringer volume to the «QUIET», «MEDIUM»,
«LOUD» or switch it off.
Below you see an example of call switching from «QUIET» into «OFF».
1 2 3
4 5 6
In the «MENU» press « » 3 times, the cursor « » move to the section
«SETTINGS» (screen 2).
Press «SELECT», the screen 3 appears on the display.
Press «SELECT», the screen 4 appears on the display.
Press «CHANGE», the screen 5 appears on the display, where the tick « » will be
placed next to the line « OFF ».
To return to the screen «MENU» press «RETURN».
To return from the «MENU» to «MEASURE» press «RETURN», the display will show
«RD1008» screen (screen 6), and then the screen «MEASURE» with the icon« », and
the icon « » will be off.
► AUDIO
VIBRA-CALL
DOSE
● SELECT RETURN
● ▼
► OFF
√ QUIET
MEDIUM
LOUD
● CHANGE RETURN ●
● ▼
► MODE
THRESHOLD
BACKGROUND
SETTINGS
CALIBRATION
● SELECT EXIT ●
● ▼
MODE
THRESHOLD
BACKGROUND
► SETTINGS
CALIBRATION
● SELECT RETURN ●
● ▼
► √ OFF
QUIET
MEDIUM
LOUD
● CHANGE RETURN ●
● ▼
RD1008
■
●
MENU OFF
●
19