Quark Eagle 2000, Руководство пользователя

Страница: 34 / 66

Eagle 2000 – 2kW FM Broadcasting Amplifier
User’s manual – Page 34 of 66
10
S
E T
F
U N C T I O N
, S
I Z E
MENU
This multilevel technical menu allows to set the equipment as MASTER or SLAVE, set its power size (according to the model),
check the time in which it worked in normal operation or other conditions and automatically reduce its output power in certain times.
This menu is password protected. The factory default password is
000000
and can be changed (
Ö
10.1.e).
1) From the main menu, turn the knob counterclockwise in order to move the cursor down to
Set Function, Size
:
2) Press the knob. You are prompted to insert the password (six digits in total). The cursor
Λ
points its first digit.
3) Turn the knob to set the correct number (in the example
0
), then press the knob to enter it and move the cursor
Λ
underneath
the second digit:
4) Repeat the last step until all the six digits have been set. When the knob is pressed the sixth time, the whole password will be
entered.
5) If the password is correct, the following page will be shown (if not, the display will go back to main menu):
•
ENTER to access Program page
: to access the program page press the knob (
Ö
10.1).
•
UP-DOWN to set new password
: to change the password turn the knob (
Ö
10.1.e).
10.1
Program page
menu
This technical menu allows to select the equipment as MASTER or SLAVE (
Ö
9.1), set the power size according to the rated value of
each model (
Ö
note on par. 5.3), check the time in which the equipment worked in normal operation, was in alarm or in stand-by
mode and automatically reduce the output power in certain times (e.g. in the night).
1) After having entered the
Set Function, Size
menu with the correct password as over stated, the display will show:
2) Press the knob. The program page will be shown. It’s split in two pages:
•
Function
: operation as
MASTER
or
SLAVE
(
Ö
10.1.a)