manualshive.com logo in svg

Quark-Elec QK-R041, Руководство пользователя, Страница: 15 / 16

Поделиться
Скачать
Quark-Elec QK-R041 Скачать руководство пользователя страница 15

 

 

 

QK-R041 Manual                                                     

  

 

V 1.0 

15  of  16 

2022 

GSM/GPRS/EDGE: 

B3/B8 

Covers EMEA & APAC main countries.

 

 

WAN port (Ethernet) 

10/100  Mbps,  IEEE  802.3,  1.5KV  transformer  isolation 
protected. Supports PPP, PPPoE, DHCP client.

  

 

LAN port (Ethernet) 

10/100  Mbps,  IEEE  802.3  and  IEEE  802.3U,  1.5KV 
transformer isolation protected. Support PPP, PPPoE, DHCP 
client

. 

 

WiFi mode 

Station modes on 802.11 b/g/n 

Security 

WPA/WPA2 

Network protocols 

TCP   

Cable Length NMEA 2000 

1.0m 

Operating temperature 

-20°C to +55°C 

Storage temperature 

-30°C to +75°C 

Operating humidity 

5%

～

95%RH

（

non-condensing

）

 

EMC   

Static IEC61000-4-2, level 3 
Pulsed Electric Field IEC61000-4-4, level 3 
Surge IEC61000-4-5, level 3 

Recommended humidity 

0 - 93% RH 

Grounding protection 

Screw 

 
 

8. Limited Warranty and Notices 

Quark-elec warrants this product to be free from defects in materials and manufacture for one year from 
the date of purchase. Quark-elec will, at its sole option, repair or replace any components that fail in 
normal use. Such repairs or replacement will be made at no charge to the customer for parts and 
labour. The customer is, however, responsible for any transportation costs incurred in returning the unit 
to Quark-elec. This warranty does not cover failures due to abuse, misuse, accident or unauthorized 
alteration or repairs. A returns number must be given before any unit is sent back for repair. 
The above does not affect the statutory rights of the consumer. 
 

Disclaimer 

This product is designed to aid navigation and should be used to augment normal navigational 
procedures and practices. It is the user’s responsibility to use this product prudently. Neither Quark-, nor 
their distributors or dealers accept responsibility or liability either to the products user or their estate for 
any accident, loss, injury or damage whatsoever arising out of the use or of liability to use this product. 
 
Quark- products may be upgraded from time to time and future versions may therefore not correspond 
exactly with this manual. The manufacturer of this product disclaims any liability for consequences 
arising from omissions or inaccuracies in this manual and any other documentation provided with this 
product. 
 

Document history 

Issue  Date 

Changes / Comments 

1.0 

03-06-2022 

Initial release 

 

Содержание QK-R041

















Отзывы:

Нет отзывов