Quark-Elec QK-AS15 Скачать руководство пользователя страница 3

 

 

QK-AS15                                                     

 

 

 

https://www.quark-elec.com

 

3  of  4 

2022 

V1.0 

2. Connections and Installation 

Installing the AS15 is a simple with only a few steps process.   

Both the antennas and the AS15 have impedance ratings, either 50 Ohms or 75 Ohms. The AS15 
impedance rating must match that of the antenna for optimal results. Most marine VHF/AIS antennas 
have the impedance of 50 Ohms, but please check before installation.   

2.1.  Wiring 

1.  The AS015 is suggested to be installed inside of the boat, in a dry and clean space, keeping it 

away from combustible material. Although it can be connected directly to the VHF radio / AIS 
receiver or WiFi router, we would suggest having a 2-foot coaxial cable between the RF device and 
the AS15. This would save the RF device in case of the over voltage/current of lightning would 
damage the AS15. 

2.  Connect one end of the AS15 to the 2-foot cable or to the RF device. Either end will work since the 

AS15 is bi-directional.   

3.  Connect the other end of the AS015 to the coaxial cable that connects to the antenna.   

2.2.  Grounding   

Grounding the AS15 is extremely important, otherwise it won’t function as intended. If the external 
antenna is shocked by high voltage energy, this will help earth ground the energy. 

Attach the ground wire to the grounding connector and use a set of pliers to crimp the wire on the 
connector firmly. The other end of the wire needs to be attached to a grounding point. When installing 
the wire, avoid creating any sharp bends. It is recommended to use a copper wire no smaller than 10 
AWG (>2.5mm diameter) and keep this lightning escape wire as short as possible.   

3. Specifications 

Item 

Specification 

Frequency range 

DC to 2500 MHz 

Impedance 

50 Ohm 

VSWR 

< 1.1 

Insert loss 

< 0.2 dB 

Input power 

400W 

Voltage at discharge start 

DC 350V ±20% 

Discharge 

voltage of shock wave (1x40)μ S 

1000 V 

With

stand current of shock wave (1x40)μ S 

6000 A 

Insulating resistance (DC 100V) 

> 5,

000MΩ 

Connector 

SO239/SO239 

Housing 

Brass, tri-metal plated 

Centre contact: 

Brass / bronze, gold plated 

Temperature Range:   

-25°C to 80°C 

 
For more information   

Содержание QK-AS15

Страница 1: ...Fi Antennas Features Designed to protect VHF AIS 3G 4G WiFi devices from lightning and other induced transients on the boat The coaxial construction assures excellent high frequency characteristics wide bandwidth low insert loss and VSWR Heavy duty design and water resistant IP65 SO239 Male to SO239 Female connectors ...

Страница 2: ... ground the surge of lightning strikes on VHF AIS 4G antennas It reduces the voltage spikes and shunt the voltage to the ground through the ground cable thus protecting the VHF radio and AIS transponders or 4G rounder The coaxial construction of the AS15 assures excellent high frequency characteristics wide band and low loss and VSWR The built in gas charging surge arrestor element ensures a fast ...

Страница 3: ... directional 3 Connect the other end of the AS015 to the coaxial cable that connects to the antenna 2 2 Grounding Grounding the AS15 is extremely important otherwise it won t function as intended If the external antenna is shocked by high voltage energy this will help earth ground the energy Attach the ground wire to the grounding connector and use a set of pliers to crimp the wire on the connecto...

Страница 4: ...be given before any unit is sent back for repair The above does not affect the statutory rights of the consumer This product is designed to aid navigation and should be used to augment normal navigational procedures and practices It is the user s responsibility to use this product prudently Neither Quark nor their distributors or dealers accept responsibility or liability either to the products us...

Отзывы: