Quark-Elec QK-A032 Скачать руководство пользователя страница 16

Страница: 16 / 22

Quark-elec Manual

https://www.quark-elec.com

16 of 22

2019

V4.0

11.Updating/ upgrading Firmware

From time to time, Quark-elec updates firmware to support additional NMEA 2000 PGNs and NMEA

0183 messages. Users can update the software on the device to the latest available version.

The firmware can be upgraded through the following process.

Firmware can also be used to upgrade from the A032-S to the A032-AIS version.

1. Power OFF

the A032

(Disconnect from NMEA 2000 network

Connect the NMEA 0183 NMEA IN – (black) and NMEA 0183 NMEA OUT – (blue)

Ensure the correct cables are attached before continuing.

Figure 7: Blue and black wires joined together

Connect NMEA 0183 NMEA IN + (Gray) and NMEA 0183 NMEA OUT + (White).

Ensure the correct cables are attached before continuing.

Figure 8: Grey and white wires joined together

Check you have connected the correct wires before powering up. Connecting the

wrong wires will damage the device!

Connect A032 to a Windows PC via USB cable.

5. Power ON

the A032

(connect to NMEA 2000 network)

In ‘my computer’ 2 new drives,

‘STM32 APP’

and

‘STM32 WiFi’

will appear.

WARNING:

The firmware must be placed in ‘STM32 APP’

folder, NOT any other

folder/window/drive that appears. Saving to the wrong location will damage the device.

Copy the upgraded firmware to the ‘

SMT32 APP’

folder.

7. Once copied successfully, Power OFF

the A032

(disconnect from NMEA 2000 network)

Remove the short connections. (disconnect the wires you connected in step 2 and 3) and

Power ON

the A032

(connect to NMEA 2000 network)

Wait at least 10 seconds and

Power OFF

A032

(disconnect from NMEA 2000 network)

10.

Finally,

RE-POWER ON

the A032

(connect to NMEA 2000 network)

(This ensures settings are

stored).

The upgrading process is complete.

Содержание QK-A032























Результаты поиска

Содержание QK-A032

Отзывы:

Похожие инструкции для QK-A032

Бренды по названию

Популярные бренды

Quark-Elec QK-A032, Руководство пользователя

Результаты поиска

Содержание QK-A032

Отзывы:

Похожие инструкции для QK-A032

Бренды по названию

Популярные бренды