background image

 

 

QK-A015-TX Manual                                                     

 

 

 

V1 

5  of  5 

2020 

VHF transmit insertion loss 

≤ 3.0dB 

FM/AM receive insert loss 

≤ 0.5dB 

FM/AM frequency range 

88-108/0.5-1.6Mhz 

Max input power from VHF port 

25W. The VHF antenna must be connected before the 
VHF radio. 

Max input power from AIS port 

12.5W. The VHF antenna must be connected before 
the AIS transponder     

FM port impendence 

75 Ohms 

AIS, VHF and antenna port impedance 

50 Ohms 

Switching time, receive to VHF transmit 

< 100 us 

Switching time, receive to AIS transmit   

< 100 us 

Operating temperature 

-10°C to +55°C 

Storage temperature 

-25°C to +85°C 

 

6. Limited Warranty and Disclaimer 

Quark-elec warrants this product to be free from defects in materials and manufacture for two years 
from the date of purchase. Quark-elec will, at its sole discretion, repair or replace any components 
that fail in normal use. Such repairs or replacement will be made at no charge to the customer for 
parts and labour. The customer is, however, responsible for any transportation costs incurred in 
returning the unit to Quark-Elec. This warranty does not cover failures due to abuse, misuse, accident 
or unauthorized alteration or repairs. A returns number must be obtained before any unit is sent back 
for repair. 
The above does not affect the statutory rights of the consumer. This product is designed to aid 
navigation and should be used to augment normal navigational procedures and practices. It is the 
user’s responsibility to use this product prudently. Neither Quark-, nor their distributors or dealers 
accept responsibility or liability either to the products user or their estate for any accident, loss, injury 
or damage whatsoever arising out of the use or of liability to use this product. Quark- products may be 
upgraded from time to time and future versions may therefore not correspond exactly with this 
manual. The manufacturer of this product disclaims any liability for consequences arising from 
omissions or inaccuracies in this manual and any other documentation provided with this product. 
 

Document history 

Issue 

Date 

Changes / Comments 

1.0 

22-11-2020 

Initial release 

 

08-04-2021 

Manual revision 

 

 
For technical support and other enquiries, please go to the Quark-elec forum a

https://www.quark-

elec.com/forum/

 or email 

[email protected]

 

 

Quark-elec (UK)   

Unit 7, the Quadrant, Newark close 
Royston, UK, SG8 5HL 
[email protected] 

Содержание QK-A015-TX






Отзывы: