22
6. Shortly press the tuning knob (DIAL) to confirm the storage of required value.
According to the site of the operation frequency in the band, when the offset is valid, these
icons will be displayed on the screen.
Positive frequency offset (+)
Negative frequency offset (-)
Or shortly press
【
EXIT
】
to return to the context menu mode without storage.
7. Shortly press
【
EXIT
】
to exit the context menu mode.
If the transmission frequency after offset exceeds the permissible scope, the transmission
will be prohibited. Adopt one of the following methods to adjust the transmission frequency to be
within the band restriction scope.
Increase or decrease the receiving frequency within the band.
Change the offset direction
2.
Selection of offset frequency
The offset frequency is the transmission frequency value deviated from the
receiving frequency.
1.
Shortly press left or right tuning knob (DIAL) to select the required frequency band.
2. Shortly press the tuning knob (DIAL) to enter the context menu.
3. Rotate the tuning knob (DIAL) and select Item 16 of the context menu as shown in
the figure.
4. Shortly press the tuning knob (DIAL) to set the current context menu.
5. Directly enter the required offset frequency via the keypad of handheld microphone,
which will be automatically saved.
