◆
Setting / clearing a single tagged channel
①
Push [U/I/C] (both [
▲
] and [
▼
]
)
several times to select the desired channel group.
②
Select the desired channel to be set as a TAG channel.
③
Push and hold [SCAN] for 1 sec. to set the displayed channel as a TAG channel.
·
“TAG” appears in the display.
④
To cancel the TAG channel setting, repeat step
③.
·
“TAG” disappears.
◆
Setting / clearing all tagged channels
①
While pushing and holding [HI/LO] on the microphone, push [SCAN] for 3 sec. to clear
all TAG channels in the selected channel group.
②
Repeat above procedure to set all TAG channels.
■
Starting a scan
Set scan resume timer in advance using Set mode.
①
Push [SCAN] to start priority or normal scan.
·
“SC” blinks during priority scan; “SCAN” blinks during normal scan.
·
Channel 16 is monitored during priority scan.
·
Push [
▲
] or [
▼
] to change the scanning direction.
·
A beep tone sounds and “SC 16” blinks at the channel comment indicator when a signal
is received on Channel 16 during priority scan.
②
To stop the scan, push [SCAN].
DUAL-WATCH / TRI-WATCH
■
Description
The transceiver has Dualwatch and Tri-watch.
Dualwatch monitors Channel 16 while you are receiving on another channel.
Tri-watch monitors Channel 16 and the call channel while receiving another channel.
