QUANTUN QP-750-U1 Скачать руководство пользователя

Страница: 25 / 29

squelch level set on the current channel.

Double Saving

Mode

Press the programmed S

Double Saving Mode key, if one beep is heard, the S

Double

Saving Mode is enabled. If two beeps are heard, the S2 Double Saving Mode is disabled.

When S

Double Saving Mode is enabled, the battery will have a more long operation

time .

Talk Around

Press the programmed function key to activate the Talk Around feature. When activated,

the Rx frequency is used in place of the Tx frequency when transmitting.

VOX

Press the programmed function key to activate the VOX feature. The VOX feature enables

you to transmit automatically by speaking into the microphone. Press the key again to exit

from the feature.

Pressing the PTT button will disable VOX .

VOX will be reactivated after switching the power off and then back on.

VOX Backup

Press the programmed function key to activate the VOX Backup feature. Press the key

again to exit from the feature. The status will be memorized after radio power off and on.

Whisper

Press the programmed function key to activate the Whisper feature. When activated, you

can speak quietly into the radio and still be heard clearly. Press the key again to exit from

the feature. The Whisper status will not be memorized once radio power off and on.

Whisper Backup

Press the programmed function key to activate the Whisper feature. When activated, you

can speak quietly into the radio and still be heard clearly. Press the key again to exit from

the feature. The Whisper status will be memorized after radio power off and on.

Содержание QP-750-U1






























Результаты поиска

Содержание QP-750-U1

Отзывы:

Похожие инструкции для QP-750-U1

Бренды по названию

Популярные бренды

QUANTUN QP-750-U1, Руководство пользователя

Результаты поиска

Содержание QP-750-U1

Отзывы:

Похожие инструкции для QP-750-U1

Бренды по названию

Популярные бренды