Quantum ValueLoader DLT VS80, Инструкция по установке и эксплуатации

Страница: 31 / 50

DLT VS80 Tape Drive Installation and Operations Guide
001596-01 Rev A07 May 2004 3-17
10.
Secure the tape drive with the mounting screws provided, either in the sides or bottom of the tape
drive sled, as appropriate for the server or workstation chassis. See
Figure 3-12 .
N
OTE
: Some servers and workstations require mounting rails for internal
devices. Contact the manufacturer for specific information, as the
mounting rails have varying thicknesses. Consequently, if a different
screw is required to mount the tape drive, use the following guidelines.
C
AUTION
Using a screw that is too short can result in inadequate
clamping force. Using a screw that is too long can cause
damage to the internal circuit cards. Please see the note
following
Figure 3-12 for guidance.
Figure 3-12.
Securing the Internal Tape Drive in the Installation Bay