Quantum ValueLoader DLT VS160, Руководство пользователя

Страница: 41 / 88

Operating the ValueLoader
Using Cartridges
ValueLoader DLT VS80/DLT VS160 Tape Autoloader User Manual 27
3 Press the
[+]
or
[–]
button until the desired slot number appears on the
LCD screen. Press
[Enter]
. You are not given the option to export from
an empty slot.
4 When
Remove Cartridge
appears on the LCD screen and the cartridge
is ejected through the Import/Export slot, remove the exported
cartridge from the ValueLoader, and press the
[Enter]
button.
5 Repeat steps 3 and 4 as needed for any additional cartridges.
6 Press the
[Cancel]
button when you are done exporting cartridges.
7 Make sure the LCD screen indicates that the desired slots are empty.
Figure 13 Exporting a
Cartridge
Loading
Cartridges
2
This option loads a cartridge from the ValueLoader carousel into the tape
drive. To use this option, follow these steps:
1 From the Home Screen or main menu, press the
[+]
or
[-]
button until
Commands
appears on the top line of the LCD screen. Then, press
[Enter]
.
2 Press the
[+]
or
[-]
button until
Load Cartridge
appears on the LCD
screen, and then press the
[Enter]
button to select.