Quantum StorNext G300 R510, Руководство по оборудованию, Страница: 35 / 50

Chapter 3: Basic System Operations
Shutting Down the G300
StorNext G300 Gateway Appliance Hardware Guide 31
To shut down the system:
1 Open an SSH connection to the system using IP address 10.17.21.1
on either the MDC/Metadata or LAN Clientnetwork.
Note: Use the IP address assigned if different from the default
used here.
2 Enter
stornext
for the username at the prompt.
3 Enter the password for the
stornext
user account.
4 At the command prompt enter the following to gain root user
access:
5 Enter the password for the stornext user account again when
prompted.
6 Press Enter.
7 Enter the following:
8
9
Enter the following:
Note: You will know the system is shut down when your monitor
goes blank, or you lose your connection with the system.
sudo rootsh
service cvfs fullstop
/sbin/poweroff