Quantum SPARK 1535, Руководство по началу работы, Страница: 27 / 70

Appliance Date and Time Settings
Quantum Spark 1535 / 1555 Appliance Getting Started Guide | 27
Appliance Date and Time Settings
In the Appliance Date and Time Settings page, configure the appliance's date, time, and time
zone settings manually or use the Network Time Protocol option.
If you select the option Set the time manually, the appliance uses the date and time from your
computer as the initial values. If necessary, change the time zone setting to show your correct
location. Daylight Savings Time is automatically enabled by default. You can change this in the
WebUI application on the Device > Date and Time page.
n Date - The date on your computer appears by default. If required, set a different date.
n Time - The time on your computer appears by default. If required, set a different time.
n Time Zone - The time zone on your computer appears by default. If required, select a
time zone setting to reflect your exact location.
n
Primary NTP server - The IP or host name of the primary NTP server. The default server
is
ntp.checkpoint.com
n Secondary NTP server - The IP or host name of the secondary NTP server. The default
server is
ntp2.checkpoint.com