Quantum Scalar i6000, Руководство пользователя

Страница: 615 / 738

Chapter 15: Maintaining Your Library
Maintenance Actions
Quantum Scalar i6000 User’s Guide 597
Note: Drives that are not connected to I/O Blades or EEBs are
listed, since drives not connected to I/O Blades can be
updated using FMR Tapes. Refer to Updating Drive
Firmware Using Update Tapes on page 597.
2 In the left-most column of the table under the Update Method
area, select one or more check boxes that correspond to drives that
you want to update with the same drive firmware image. Use the
following rules to select drives:
• Do not select drives that are currently loaded.
• If you select more than one drive, make sure that they are all of
the same drive type.
• Click Select All to select all drives. All drives must be of the
same drive type.
Note: You can only perform firmware update for drives of the
same product, such as HP or IBM, and type, for example
LTO-4 or LTO-5.
3 From the drop-down list in the Select Firmware File area, click the
drive firmware image you want to use to update the drives you
selected.
Caution:
The drop-down list includes all drive firmware images
that are currently stored on the library, regardless of
drive type. Be careful to select a drive firmware image
that is compatible with the type of drive that you want
to update. See the library’s
Release Notes
for
compatibility information or contact Quantum
technical support.
4 Click Start . The library updates the firmware on each selected drive.
Updating Drive Firmware Using Update Tapes
It is important to verify that the library firmware version is compatible
with the new drive firmware version. To determine the appropriate drive
firmware, see the library’s
Release Notes
or contact Quantum technical
support. If you need to update drive firmware by using update tapes,
perform the following procedure.